How to Put on Screw Back Earrings

Are you know the how to put on screw back earrings. So you’ve strong-willed to take the thrust and get some luminous new earrings. Congratulations!

The hard work is done, but you still have an important decision to make; what type of earring backs are the best to hold the earrings steadily in place on your ear? The choice will depend on the sort and size of the earring, your lifestyle, and to some degree your earlobes themselves.

Roughness Earring Backs

This is the only and commonest sort of earring back. It consists of a flat plate with a hole the size of the post. It slides onto the post and goes against the ear.

It has scrolls of metal that curvature up and presses against the post with a light-weight spring tension that holds the rear in situ.

Roughness backs are easy to pop on and off so are very convenient. They come in a sort of sizes, with the smaller ones being the primarily affordable type earring back.

Screw Back Earrings

The safest and sound sort of earring back is that the screw back. It consists of a threaded post and a nut that’s spun onto the post up to the rear of the ear lobe. It can’t be pulled off- it’s to be fully unscrewed.

This is both approval and a curse – much less likely that you simply will lose an earring, but longer consuming putting them on and taking them off. Screw backs, therefore, tend to be an honest option just for high-value earrings.

La Pousette Earring Backs

The La Pousette back maybe a finely tooled and cleverly designed perfunctory back. It features a spring-loaded mechanism that’s pressure-activated.

You pinch the back by the tabs thereby retracting small connections inside the back that contact the post. Releasing them engages the connection which holds the stern tight to the post.

The post also features a safety notch near the top. If the back was able to slide down the post-it would catch at the notch without falling off.

Jumbo Backs

Fundamentally just oversized resistance backs, jumbo backs are both easier to control and supply a bigger flat plane that helps support the earring.

Jumbo backs can be helpful in keeping larger stud earrings relaxed. Because of their larger size, gold and platinum jumbo are costlier than small or regular size friction backs.

Optional Plastic Earring Disks

For added support, simple clear plastic disks are every now and then added between the back of the earlobe and the back. This has an equivalent effect as jumbo backs increasing the steadiness of the earring.

This can be helpful in getting earrings to sit straight on certain types of earlobes. If you’re having trouble with earrings not presenting simple, do this simple and cheap solution.

Choice of Valuable Metals

Also, a part of choice-making is the choice of metals. Fine jewelry is generally made with gold or platinum alloys. Gold alloys are generally yellow and white, which decision is predicated upon taste and preference.

Platinum is a premium price alternative to white gold, and although it looks very much the same, a small number of people have skin sensitivity to some white gold alloys. In this case, we recommend platinum because it is hypoallergenic.

1. Screw the back by rotating it to the right

2. Do this until the back screws onto the post

3. Do not over screw the back because it could damage the piece and/or post

4. Always ensure the back is squarely on the end of the rod before screwing, to ensure against cross-threading

(FAQs) About How to Put on Screw Back Earrings

Q. How do you put on flat back earrings?

A. To insert Comfy Earrings into your piercing simply unscrew the back then insert the post from the front like you would any regular stud earring. Then just hold the flat back in situ behind your ear and twist the front setting while holding the flat back still.

Q. How do you put an earring back in?

A. Slide the end into your ear, point-first, and slowly interweave the earring as it goes in. You need to wiggle it around a touch to urge it in and find the opening.

Sometimes it’s at an awkward angle! Push until the front of the earring is flush against your ear or until the earring is as far in as you want it to go.

Q. Can earring holes close up after 10 years?

A. Can earring holes close up after 10 years? The earlobes have a really tough fistula, and it’ll tighten over a while. You can, therefore, choose a couple of years, even ten years, and therefore the hole won’t be sufficiently close. However, that depends on the area of your ear.

Q. Why won’t my earring go through the back?

A. If you tried to put the earring in from the front and back of the lobe and it still won’t go in, try to insert it from different angles. It might go in if inserted at the right angle.

If the earring won’t enter with some pressure, the opening may need already completely closed, and you would like to ascertain well-informed.

Q. When did they stop making screw-back earrings?

A. Screw-back non-pierced earrings that were made in 1900 are still made today but they’re not that common on newer pieces. Kidney wires were invented within the 1870s and also are still used today. The shape has been modified within the modern earring.

Final Words of How to Put on Screw Back Earrings

1. Screw the back by rotating it to the right

2. Do this until the back screws onto the post

3. Do not over screw the back because it could damage the piece and/or post

4. Always ensure the back is squarely on the end of the rod before screwing, to ensure against cross-threading

Leave a Comment

Your email address will not be published. Required fields are marked *